1 - Used Schuler Model “Formmaster” GB15-5 Progressive 5-Die Cold Header, New in 1984

Specifications:
Nominal Capacity - Slide                  1000 kN       or       110 Tons
Nominal Tonnage before BDC                  3mm up       or       1/8” up\
Work Capacity per stroke at 110 SPM and
      6% Slowdown                        9 kJ            or        6500 ft. lbs.
Drive Capacity                              31.5 kW       or        42 HP
SPM                                    110 - 150       or       110 to 150
Slide Stroke                              180mm       or       7”
Wire Dia. Max. at 600 N/mm2                  
      (85,000 psi)                        16mm            or      0.63”
Cut-Off Length Max.                        140mm      or       5.51”
Die spacing (center to center)
      (transfer step)                        100mm      or       3.93”
Die Holder dia. x depth                  90x165mm      or       3.54” x 6.49”
Punch Holder dia. x depth                  70x115mm      or      2.75” x 4.52”
Distance between front edge of die and
      front edge of punch block at BDC      50mm            or       1.96”
Ejector stroke, die side, front to             20-120mm       or      0.78-4.72”
Ejector force, die side, total                  100kN            or       11 tons.
                  per station            40kN            or      4-1/2 tons
Ejector stroke, punch side                  40mm            or      1.57”
Ejector force, punch side, total                  25 kN            or      2-3/4 tons
                   per Station            13kN             or       1-1/2 tons
Punch Adjustment =/-                        5mm            or      0.196”
Number of Stations                        5            or       5
Wire Infeed height above floor                  1390mm      or      55”
Overall Height above floor, approx.            2700mm      or       106”
Shop air at 6 bar (85 psi) and 30 jogs/min.      1200 1/min.      or      42 ft.3./min.
Net weight of Press                        24.5 Tons       or       27 tons

Equipped With:
All Electric Controls.
RMG Auto Draw Model 1611-2546-23 Wire Draw/Straightner - 460/3/60 Electrics, 33.7 amps
Horizontal Coil Reel - Capacity to 20,000 Lbs. Approx.
Chip Conveyor

Specifications and Equipment are Preliminary, Subject to Buyer Verification.